|
|
|
|
|
|
435 Premium Marine-Grade Polyester Resin, Quart w/ 1oz MEKP
|
|
|
435 is our
most popular resin for marine construction,
repair and general automotive applications.
Excellent for all types of fiberglass
lamination, layup, and repair work. Good
strength and nice wet out make this resin very
popular.
Color:
Dark Amber/Purple
|
|
|
|
|
|
|
|
|
|
|
Silmar 41 Clear Casting Polyester Resin, Quart w/ 1oz MEKP
|
|
|
Clear resin
used primarily in thick castings where a water
clear cured product is required. Used
extensively in decorative and artistic
applications. Catalyst ratio must be varied to
account for thickness of cast and temperature.
Testing suitability of this product is highly
recommended for unusual applications.
**Not for use as a thin coat laminating
resin.**
Transparent
pigments
can be added for desired effects.
Color:
Transparent Blue / DRIES
Clear
|
|
|
|
|
|
|
|
|
|
|
Silmar 249 Clear Polyester Resin, Quart w/ 1oz MEKP
|
|
|
Clear
polyester laminating resin. Used in surfboard
construction and also composites where a clear
surface finish is needed. Contains
UV inhibitors for long lasting outdoor
protection.
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
Color: Transparent Blue / DRIES
Clear
|
|
|
|
|
|
|
|
|
|
|
Quart White Gelcoat w/ 1oz MEKP
|
|
|
Our
standard pure white gelcoat is designed for
exterior use in virtually all types of marine,
automotive and general part construction and
repair. Isophthalic base ideal for marine
applications.
No wax added. Pigment
can be added to change the color of the gelcoat
but any color added will be offset by the pure
white color.
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
|
|
|
|
|
|
|
|
|
|
|
Quart Neutral Gelcoat w/ 1oz MEKP
|
|
|
A neutral
base color gelcoat should be tinted with one of
our compatible colored
pigments.
In order to achieve the desired color you should
add 1oz of pigment to one quart, 4oz pigment
will tint one gallon .
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
|
|
|
|
|
|
|
|
|
|
|
Quart Clear Gelcoat w/ 1oz MEKP
|
|
|
Clear
gelcoat, primarly used as a clear surface
coating over polyester resin. Provides a hard,
durable clear finish. Contains
UV inhibitors for outdoor and marine use.
The clear gelcoat can also be mixed with an
automotive glitter/metal flake for a metallic
finish.
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
|
|
|
|
|
|
|
|
|
|
|
700 Vinyl Ester Resin, Quart w/ 1oz MEKP
|
|
|
Vinyl Ester
resin is superior in every property as compared
to all polyester resins. This product is used in
high-performance applications in which
high-strength and maximum heat tolerance is
necessary. This resin is extremely chemical
resistant when cured. Similar in strength to
epoxies with much increased stiffness. Vinyl
ester resin will cure slower than most polyester
resins and increasing your MEKP ratio may be
necessary in cold weather(below 75°F)
Color:
Dark Amber/Purple
|
|
|
|
|
|
|
|
|
|
|
Quart Orange Tooling Gelcoat w/ 1oz MEKP
|
|
|
Tooling
gelcoat is primarily used as a surface coating
for the interior of fiberglass molds. To
complete the mold this gelcoat is typically
backed with our 404 Tooling Resin along with a
combination of fiberglass mat and cloth.
|
|
|
|
|
|
|
|
|
|
|
Quart Black Tooling Gelcoat w/ 1oz MEKP
|
|
|
Tooling
gelcoat is primarily used as a surface coating
for the interior of fiberglass molds. To
complete the mold this gelcoat is typically
backed with our 404 Tooling Resin along with a
combination of fiberglass mat and cloth.
|
|
|
|
|
|
|
|
|
|
|
816 General Purpose Boatyard Polyester Resin, Gallon w/ 2oz MEKP
|
|
|
|
|
|
|
|
|
|
|
|
|
|
435 Premium Marine-Grade Polyester Resin, Gallon w/ 2oz MEKP
|
|
|
435 is our
most popular resin for marine construction,
repair and general automotive applications.
Excellent for all types of fiberglass
lamination, layup, and repair work. Good
strength and nice wet out make this resin very
popular.
Color:
Dark Amber/Purple
|
|
|
|
|
|
|
|
|
|
|
Silmar 41 Clear Casting Polyester Resin, Gallon w/ 2oz MEKP
|
|
|
Clear resin
used primarily in thick castings where a water
clear cured product is required. Used
extensively in decorative and artistic
applications. Catalyst ratio must be varied to
account for thickness of cast and temperature.
Testing suitability of this product is highly
recommended for unusual applications.
**Not for use as a thin coat laminating
resin.**
Transparent
pigments
can be added for desired effects.
Color:
Transparent Blue / DRIES
Clear
|
|
|
|
|
|
|
|
|
|
|
404 Tooling (Iso-phthalic) Resin, Gallon w/ 2oz MEKP
|
|
|
404 is an
isophthalic polyester resin that is used where
strength and durability is a must. Experiences
lower shrinkage and a higher heat distortion
temperature than orthophthalic type polyester
resins. Used extensively in boat hulls and in
fiberglass mold construction.
Color:
Dark Amber/Purple
|
|
|
|
|
|
|
|
|
|
|
Silmar 249 Clear Polyester Resin, Gallon w/ 2oz MEKP
|
|
|
Clear
polyester laminating resin. Used in surfboard
construction and also composites where a clear
surface finish is needed. Contains
UV inhibitors for long lasting outdoor
protection.
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
Color: Transparent Blue / DRIES
Clear
|
|
|
|
|
|
|
|
|
|
|
Gallon White Gelcoat w/ 2oz MEKP
|
|
|
Our
standard pure white gelcoat is designed for
exterior use in virtually all types of marine,
automotive and general part construction and
repair. Isophthalic base ideal for marine
applications.
No wax added. Pigment
can be added to change the color of the gelcoat
but any color added will be offset by the pure
white color.
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
|
|
|
|
|
|
|
|
|
|
|
Gallon Neutral Gelcoat w/ 2oz MEKP
|
|
|
A neutral
base color gelcoat should be tinted with one of
our compatible colored
pigments.
In order to achieve the desired color you should
add 1oz of pigment to one quart, 4oz pigment
will tint one gallon .
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
|
|
|
|
|
|
|
|
|
|
|
Gallon Clear Gelcoat w/ 2oz MEKP
|
|
|
Clear
gelcoat, primarly used as a clear surface
coating over polyester resin. Provides a hard,
durable clear finish. Contains
UV inhibitors for outdoor and marine use.
The clear gelcoat can also be mixed with an
automotive glitter/metal flake for a metallic
finish.
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
|
|
|
|
|
|
|
|
|
|
|
700 Vinyl Ester Resin, Gallon w/ 2oz MEKP
|
|
|
Vinyl Ester
resin is superior in every property as compared
to all polyester resins. This product is used in
high-performance applications in which
high-strength and maximum heat tolerance is
necessary. This resin is extremely chemical
resistant when cured. Similar in strength to
epoxies with much increased stiffness. Vinyl
ester resin will cure slower than most polyester
resins and increasing your MEKP ratio may be
necessary in cold weather(below 75°F)
Color:
Dark Amber/Purple
|
|
|
|
|
|
|
|
|
|
|
Gallon Orange Tooling Gelcoat w/ 2oz MEKP
|
|
|
Tooling
gelcoat is primarily used as a surface coating
for the interior of fiberglass molds. To
complete the mold this gelcoat is typically
backed with our 404 Tooling Resin along with a
combination of fiberglass mat and cloth.
|
|
|
|
|
|
|
|
|
|
|
Gallon Black Tooling Gelcoat w/ 2oz MEKP
|
|
|
Tooling
gelcoat is primarily used as a surface coating
for the interior of fiberglass molds. To
complete the mold this gelcoat is typically
backed with our 404 Tooling Resin along with a
combination of fiberglass mat and cloth.
|
|
|
|
|
|
|
|
|
|
|
816 General Purpose Boatyard Polyester Resin, 5 Gallon w/ 6oz MEKP
|
|
|
|
|
|
|
|
|
|
|
|
|
|
435 Standard Polyester Resin, 5 Gallon w/ 6oz MEKP
|
|
|
435 is our
most popular resin for marine construction,
repair and general automotive applications.
Excellent for all types of fiberglass
lamination, layup, and repair work. Good
strength and nice wet out make this resin very
popular.
Color:
Dark Amber/Purple
|
|
|
|
|
|
|
|
|
|
|
Silmar 41 Clear Casting Polyester Resin, 5 Gallon w/ 6oz MEKP
|
|
|
Clear resin
used primarily in thick castings where a water
clear cured product is required. Used
extensively in decorative and artistic
applications. Catalyst ratio must be varied to
account for thickness of cast and temperature.
Testing suitability of this product is highly
recommended for unusual applications.
**Not for use as a thin coat laminating
resin.**
Transparent
pigments
can be added for desired effects.
Color:
Transparent Blue / DRIES
Clear
|
|
|
|
|
|
|
|
|
|
|
404 Tooling (Iso-phthalic) Resin, 5 Gallon w/ 6oz MEKP
|
|
|
404 is an
isophthalic polyester resin that is used where
strength and durability is a must. Experiences
lower shrinkage and a higher heat distortion
temperature than orthophthalic type polyester
resins. Used extensively in boat hulls and in
fiberglass mold construction.
Color:
Dark Amber/Purple
|
|
|
|
|
|
|
|
|
|
|
Silmar 249 Clear Polyester Resin, 5 Gallon w/ 6oz MEKP
|
|
|
Clear
polyester laminating resin. Used in surfboard
construction and also composites where a clear
surface finish is needed. Contains
UV inhibitors for long lasting outdoor
protection.
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
Color: Transparent Blue / DRIES
Clear
|
|
|
|
|
|
|
|
|
|
|
5 Gallon White Gelcoat w/ 12oz MEKP
|
|
|
Our
standard pure white gelcoat is designed for
exterior use in virtually all types of marine,
automotive and general part construction and
repair. Isophthalic base ideal for marine
applications.
No wax added. Pigment
can be added to change the color of the gelcoat
but any color added will be offset by the pure
white color.
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
|
|
|
|
|
|
|
|
|
|
|
5 Gallon Neutral Gelcoat w/ 12oz MEKP
|
|
|
A neutral
base color gelcoat should be tinted with one of
our compatible colored
pigments.
In order to achieve the desired color you should
add 1oz of pigment to one quart, 4oz pigment
will tint one gallon .
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
|
|
|
|
|
|
|
|
|
|
|
5 Gallon Clear Gelcoat w/ 12oz MEKP
|
|
|
Clear
gelcoat, primarly used as a clear surface
coating over polyester resin. Provides a hard,
durable clear finish. Contains
UV inhibitors for outdoor and marine use.
The clear gelcoat can also be mixed with an
automotive glitter/metal flake for a metallic
finish.
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
|
|
|
|
|
|
|
|
|
|
|
700 Vinyl Ester Resin, 5 Gallon w/ 6oz MEKP
|
|
|
Vinyl Ester
resin is superior in every property as compared
to all polyester resins. This product is used in
high-performance applications in which
high-strength and maximum heat tolerance is
necessary. This resin is extremely chemical
resistant when cured. Similar in strength to
epoxies with much increased stiffness. Vinyl
ester resin will cure slower than most polyester
resins and increasing your MEKP ratio may be
necessary in cold weather(below 75°F)
Color:
Dark Amber/Purple
|
|
|
|
|
|
|
|
|
|
|
5 Gallon Orange Tooling Gelcoat w/ 12oz MEKP
|
|
|
Tooling
gelcoat is primarily used as a surface coating
for the interior of fiberglass molds. To
complete the mold this gelcoat is typically
backed with our 404 Tooling Resin along with a
combination of fiberglass mat and cloth.
|
|
|
|
